Skip to main content Skip to search Skip to main navigation

Fissart 45°

Product information "Fissart 45°"

Self-adhesive plastic mounting corners with positioning aid for panels: 
With these corners, the picture hangs straight - even if wall screws have been installed at a height offset of up to 50 mm. Use the edge spacers to position the two corners on the back of the panel and glue them in place. The corners can also be screwed into the panel if the panel material is suitable. 
Then place them on two wall-mounted screws and align them straight - very easy and feasible for everyone. 
Simple hanging support for rigid panels with unprinted and uncoated smooth, clean, dry backing. 
We supply 2 mounting corners and transparent, self-adhesive buffers as well as two wall screws with plugs for use in load-bearing brickwork or concrete. 
 The suitability of the products for the respective application must be checked on site by the person carrying out the work. The person carrying out the installation is solely responsible for the correct installation in accordance with the instructions or product description supplied and the results.  
The holding force of the double-adhesive is only effective if all points in the instructions are followed exactly.
area of use:
indoors
colour:
not at sight
load /smallest unit:
4kg
material:
synthetics
mounting system:
for gluing
panel thickness:
n.a. ! max. load
Your order options at a glance
Product
Article-no.
Weight/SU
Avail.
0.06 kg

Will be produced for stock

€9.30

Content: 2 piece
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Similar products
Skip product gallery

Similar products

Fissart
Fissart
Self-adhesive hanger for concealed panel mounting with eccentric disc for easy alignment and secure hold

Fissart is a hanger with double-adhesive and eccentric disc for concealed wall mounting with shadow gap for panels with a smooth surface. The system consists of a mounting plate with double-adhesive tape and an eccentric disc for wallmounting.Remove the protective film from the double-adhesive on the mounting plate, then and position it using the integrated pull off spacer bracket and glue in place on the back of the panel. The mounting plate already contains a cutout and the panel can be hung directly on a wall hook or nail.For fixing and alignment, we recommend mounting the eccentric disc on the wall and hooking the lower toothed part of the mounting plate into the eccentric disc: this not only fixes the panel to the wall, but also allows it to be aligned using horizontal movements. The double-adhesive supplied is suitable for dry, uncoated, unprinted, dust-and grease-free smooth surfaces for interior use. The holding force of the double-adhesive is only effective if all points in the instructions are followed exactly.  The suitability of the products for the respective application must be checked on site by the person carrying out the work. The person carrying out the installation is solely responsible for the correct installation in accordance with the instructions or product description supplied and the results.  

From €2.77
Pixfix
Pixfix
Concealed, secure wall mounting and easy replacement of panels with self-adhesive hanger and wall-mounted counterpart

Pixfix attaches panels without perforation, tamper-proof and with a shadow gap. Attach a mounting plate to the panel with double-sided adhesive. Use the mounting template to quickly and accurately mark the correct position of the drill holes for the counterpart on the wall by simply pressing it into place without the need for time-consuming measuring. Mount the counterpart on the wall and click the panel into place. Pixfix is suitable for panels with smooth surfaces and can also be attached to the panel with screws if required.Secure wall fixing for rigid panels with unprinted and uncoated smooth, clean, dry backing. We supply wall screws with plugs for use in load-bearing brick or concrete masonry. The suitability of the products for the respective application must be checked on site by the person carrying out the work. The person carrying out the installation is solely responsible for the correct installation in accordance with the instructions or product description supplied and the result of this.The double-sided adhesive supplied is suitable for dry, uncoated, unprinted, dust-free and grease-free smooth surfaces indoors. The performance of the double-sided adhesive is only guaranteed if all the specifications in the installation instructions are observed.

€13.30
Pixfix Safe
Pixfix Safe
Concealed, secure wall mounting and easy replacement with self-adhesive holder and wall-mounted counterpart. Optional anti-theft device with clever locking technology

With Pixfix safe we go one step further: mount bigger panels invisibly and without any holes. Panels can be fixed with adhesive tape or screws. The main attraction: an integrated lock can be activated optionally after mounting, making your presentation tamper- and thief-proof. Order extra the matching magnet.Size: 150x200mm

€28.50
Backrail
Backrail
Self-adhesive, concealed mounting rail for rigid panels: with levelling hooks for fine alignment along the horizontal axis

Backrail concealed mounting rail for quick and professional wall mounting of printed panels with shadow gap: Stick on aluminium profile and transparent spacer buffer - already pre-assembled with double-sided adhesive, Click the plastic hooks along the aluminium rail into the desired position and you're done.The two hooks can be individually height-adjusted by 10 mm thanks to the integrated grub screws, allowing fine alignment of the wall-mounted panels along the horizontal axis. This compensates for angled drill holes and ensures straight suspension. Secure wall fixing for rigid panels with unprinted and uncoated smooth, clean, dry backing. We supply wall screws with plugs for use in load-bearing brick or concrete masonry. The suitability of the products for the respective application must be checked on site by the person carrying out the work. The person carrying out the installation is solely responsible for the correct installation in accordance with the supplied instructions or product description and its result.The double-sided adhesive supplied is suitable for dry, uncoated, unprinted, dust-free and grease-free smooth surfaces indoors. The performance of the double-sided adhesive is only guaranteed if all the specifications in the installation instructions are observed.

From €17.50